Custom Fab and Body
Cost Competitive, Quality Designed Truck Bodies



  Contact Us

  About Us

  Fire Apparatus

  Rescue Apparatus


  Commercial Applications

  Product Gallery

  Map / Directions


  You can also
download a
data sheet

/home /pumper /little rice wi pumper

Custom Fab and Body Recent Deliveries
Little Rice, WI

Little Rice Fire Department, Wisconsin
Aluminum Bodied Commercial Pumper

   Built on a Freightliner M2 chassis, 300HP engine and automatic transmission.  This truck is equipped with a custom, fully enclosed top mount pump control module directly behind the cab.  In the heated enclosure there is a removable bench seat w/3 SCBA backrests w/bottle clips and seatbelts, dome lights, defroster fans, a pass through from the cab to enclosure, and all the pump controls.  There are two 1-1/2” cross-lay discharges located under the removable bench seat for the ease of repacking.  There are a total of (4)  2-1/2” discharges located on the apparatus; 1-left, 1-right, and 2-rear.  Plumbing and a mounting plate for a deck gun are installed directly behind the enclosure in a position where the pump operator can control it through the rear-sliding window.  The two side 6” inlets are equipped with manually controlled butterfly valves w/a hand wheel control at the pump panel.  The body consists of the dual high side configuration w/Gortite rollup doors. There are two-rear slide in compartments w/aluminum diamond plate doors.  One is storage for the customer’s portable folding tank w/a plastic lumber floor and a roller at the rear for ease of loading and unloading.  The other compartment is storage for two lengths of 6”X10” PVC suction hose (1) at the top and (1) at the bottom. In between the suction hose is where the 24’ 2-section, 14’ roof, and 10’ folding ladders are stored along w/2 pike poles.  In the wheel wells there is a total of 4 SCBA bottle compartments, 2 each side.  Also on board there is a 6KW Harrison hydraulic generator which is installed in the dunnage area directly behind the pump operator enclosure w/a digital readout on the pump panel.  The generator operates (2) 500 watt telescoping Tele-Lites, (2) sealed outlet boxes located (1) each side of the pump enclosure.  Lighting consists of Weldon 26° scene lights; 1 each side & 2 rear, Weldon halogen taillights and backup lights, LED clearance lights, Emergency lighting consists of Federal lights including light bar (Street Hawk), intersection & low level halogen flashers (GH3F), Sentry rotators, & head light flasher w/high beam over ride.  The siren & speaker are also Federal (PA300 & Dyna Max). Finishing off the apparatus, Realwheels wheel simulators were installed.

Repeat Customer!

   Little Rice, WI Fire Department also took delivery of a custom commercial pumper / tanker.  This unit was also ordered from Custom Fab and Body.  See the delivery write-up here.

For more information about this Aluminum Bodied Pumper contact:
Custom Fab and Body
158 U.S. Hwy 45
Marion WI 54950
Phone: (715) 754-5316
Fax: (715) 754-2903

For General Sales Information, email
Visit our web site @

- Home Page - Site Index - Contact Us - Fire Apparatus -
- Commercial Applications - Custom Fabrication - Product Gallery -

Page created January 21, 2006 DSH
Page edited August 26, 2012