Custom Fab and Body
Cost Competitive, Quality Designed Truck Bodies


  Contact Us

  About Custom Fab and Body

  Fire Apparatus

  Rescue Apparatus


  Commercial Applications

  Product Gallery

  Map / Directions


  You can also
download a
data sheet


Custom Fab and Body Recent Deliveries
Lawrence, WI

Town of Lawrence Wisconsin
Aluminum Bodied Commercial Pumper

  The apparatus is built on a Peterbuilt 330 chassis with a 330 H.P. Cat engine and Allison EV Series automatic transmission. This pumper is equipped with a Waterous CSU 1500 gpm pump with Foam Pro 2001 injection system. The water tank is 1000 gallons with a 20-gallon foam cell. The pumper body with a top control pump operator’s panel is completely built from aluminum. The body compartments were designed to fit the fire departments needs. The compartments are full depth, approximately 25” deep, full height on both sides of the apparatus. Suction hose, pike poles, and an attic ladder are stored in two (2) individual compartments at the top of the body compartments with a rear door. In the right rear compartment of the apparatus there is a 4-bottle 4500 psi cascade system with control panel and fill chamber. The ladders are stored through the water tank above the rear intermediate step with a horizontally hinged lift-up door. On the pump there is two (2) 6” air actuated butterfly valves and one (1) 2.5” auxiliary inlet provided. The discharge plumbing of the apparatus is all stainless steel w/Akron 8800 Series quarter turn ball valves. There is four (4) 2.5” discharges, (2 left, 1 right, 1 rear), one (1) LDH discharge at the right side with 3.5” Akron valve and 5” Storz adapters, and one (1) deck gun discharge. There are two (2) 1.5” speed lay discharges provided under the pump control panel, which are plumbed with foam capabilities. The apparatus is equipped with a Harrison 10KW hydraulic generator to provide power to the four (4) 1500 watt Extenda-Lites, one (1) Hannay electric rewind cord reel with GFE junction box, and any other outlets provided. The truck is supplied with a Federal light bar, upper rear beacons, and front and side LED flashers. At the rear there are four (4) Code 3 7”X9” LED flashers to provide additional warning to the rear of the truck. A Federal siren and speaker provide audible warning on this custom built rescue style pumper for the Town of Lawrence Fire Department..

Repeat Customer!
See the Town of Lawrence Fire Dept Brush Unit

For more information about this commercial pumper contact:
Custom Fab and Body
158 US Hwy 45
Marion WI 54950
Phone: (715) 754-5316
Fax: (715) 754-2903

For General Sales Information, email
Visit our web site @

- Home Page - Site Index - Contact Us - Fire Apparatus -
- Commercial Applications - Custom Fabrication - Product Gallery -

Page created July 30, 2004 DSH
Page edited July 31, 2004 danhohn